NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Ethernet Backhaul - Connected Orbi Issue
I have an RBK753 system. With a router and 3 satellites. The satellites are connected via ethernet backhaul to a switch along with the router. I have noticed that usually the 3 satellites show th...
What Firmware version is currently loaded?
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
Is the switch connected to the back of the RBR?
What is the Mfr and model# of the ethernet switch in the configuration?
https://kb.netgear.com/000051205/What-is-Ethernet-backhaul-and-how-do-I-set-it-up-on-my-Orbi-WiFi-System 📡
What CAT# cable is being used? CAT6 is recommended.
- Hi,
Thanks for your reply
RBR 750 - firmware - 4.6.5.14
RBS 750 - firmware - 4.6.5.14
ISP modem - open reach g fast modem model MT992
Switch - TP-Link TL-SG108S, 8 Port Gigabit Ethernet Network Switch
The modem is plugged into the routers wan port. One of the lan ports is connected to the switch. Then all of the satellites connect to the switch.
All CAT5 cable.
Thanks
akhilstyle wrote:
Hi,
Thanks for your reply
RBR 750 - firmware - 4.6.5.14
RBS 750 - firmware - 4.6.5.14
ISP modem - open reach g fast modem model MT992
Switch - TP-Link TL-SG108S, 8 Port Gigabit Ethernet Network Switch
Seen others with this brand having problematic issues with Orbi systems. Has Green ethernet features that can cause problems:
- Green Ethernet technology saves power consumption
The modem is plugged into the routers wan port. One of the lan ports is connected to the switch. Then all of the satellites connect to the switch.
All CAT5 cable. < Cat6 LAN cables are recommended at minimum.- Thanks.
Are there any examples of unmanaged switches that work?
Thanks