How to solve intermittent hang issue in zoom calls with Orbi AX4200

What Firmware version is currently loaded?
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?

What is the distance between the router and satellite(s)? 30 feet or more is recommended in between RBR and RBS to begin with depending upon building materials when wirelessly connected. https://https://https://kb.netgear.com/000036466/How-far-should-I-place-my-Orbi-satellite-from-my-Orbi-router
https://kb.netgear.com/31029/Where-should-I-place-my-Orbi-satellite

Try disabling AX mode on the RBR as a first step.

Then try setting 2347 for CTS Under Advanced Tab/Advanced Settings/Wireless Settings.  Set 20/40Mhz Coexistence to 40Mhz only. Set Short preamble instead of Long preamble modes. Save settings and reboot the router and satellite(s).

Is Armor enabled? 

Daisy Chaing and Beamforming are automatic on Orbi AX systems. 

---

vk1947 wrote:

My device is AX4200 with 1 router and 1 sattelite

 

The wifi seems to be workign well except 2 problems

1. During zoom calls taken on lenovo laptop, the video intermittently hangs

2. My sons Samsung Note9 drops wifi connectivity randomly and frequently. (turning off wifi on phone and reconnecting solves the problem)

 

I have tried to change 5 GHz channel numbers, but it does not help.

 

Many sites talk about daisy chain and/or beam-forming. But I don't see setup for that on AX4200. (Does it still exists on AX4200).

 

Need help because even though, I am happy about coverage and speed, the above 2 issues are show-stopper

 

---