NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
I can name the network anything EXCEPT for the old name.
I'm having the exact same issue!
My Orbi system (1 base, 3 satellites) stopped allowing wifi connections one day after power cycle, I then reset it. After reset, I can name the network anythin...
What is the SSID name your trying to use? HouseOfMouse
What firmware is loaded on the system? Newest 4.6.14.3
How long have you had the system for? 2 Years
Has this SSID name ever worked or is this new? This was an old SSID
How did you reset the system? I used a pin to push in the small hole until the system flashed orange, then white, then steady white
What is the size of your home? Sq Ft? 2000sqft, I have 3 satellites because its spread out over a U shape.
What is the distance between the router and satellite(s)? 30 feet or more is recommended in between RBR and RBS️ to begin with depending upon building materials when wired or wirelessly connected. I unplugged all the satellites, but previously it was 30-50ft️
What channel configurations are currently set on the router? Whatever is default
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too? ATT Fiber BGW-210
I'm having the exact same issue!
My Orbi system (1 base, 3 satellites) stopped allowing wifi connections one day after power cycle, I then reset it. After reset, I can name the network anything EXCEPT for the old name.
I've tested this in so many ways, with / without satellites, renaming to other names. Every time, as soon as I change the name to the old name, I can no longer connect. I've even unplugged all the satellites thinking maybe there was an old state causing interference, but even just the main base with the old name gives me the same issue, it is quite perplexing.
I have the same issue as the OP in that I prefer to keep my Wifi access SSID the same as I have 50+ light switches, bulbs, devices all programmed into scenes with Google Home that I would prefer not to have to reset, as it would take hours.
I even purchased another Orbi set to see if the issue was the Orbi set and it appears it is not, the new system has the same issue. So to me, it seems like something about the devices connecting are causing the issue, but I can't imagine what that could be.