NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
I have an Orbi RBK753 kit
I know this is an old thread, and I haven’t been actively involved in these forums but I’m about to pull my hair out with Netgear.
I have an Orbi RBK753 kit. Unfortunately it is just a few wee...
Thanks for your reply.
This is the firmware version I have, though it had to be done manually as the Orbi interface was showing an older firmware as being the most up to date.
Would you happen to have any other suggestions at all?
Thank you.
Sorry. I did not realize the post was tacked onto a very long conversation. My Bad for trying to do this on a tablet.
No apology required, thanks for answering so quickly in the first place 👍🏻
What Firmware version is currently loaded?
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?What is the size of your home? Sq Ft?
What is the distance between the router and 📡 satellite(s)? 30 feet or more is recommended in between RBR and RBS📡 to begin with depending upon building materials when wirelessly connected.
https://kb.netgear.com/31029/Where-should-I-place-my-Orbi-satellite 📡What channels are you using? Auto? Try Auto and 48 on 5Ghz. Or try setting manual channel 1, 6 or 11 on 2.4Ghz and 40 to 48 channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?
