NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
LAG for Dual WAN Orbi RBK 852
How to setup dual wan with link aggregation from two nokia G-140W-F units
Maybe you can have the LAG enabled and use two different ISP modems:
https://kb.netgear.com/000061324/How-do-I-set-up-WAN-aggregation-on-my-Orbi-WiFi-6-System
Let us know if you find out this works for you.
Have been trying to setup the LAG/LACP(Step 7) for Nokia G-140W-C & Nokia G-140W-F however not sure how did one achieve dual wan. I have two different ISPs connected to thes modem+router units
I don't have a RBK852 but my understanding was the WAN port aggregation was single device usage.
Otherwise you'd have the options of load balancing/fail-over like a dual wan router and not a wan port aggregate router.
i sure could be wrong.
plemans wrote:... my understanding was the WAN port aggregation was single device usage.
Otherwise you'd have the options of load balancing/fail-over like a dual wan router and not a wan port aggregate router.
Perfectly correct.
Darkknight007 there is no support for operating multiple WAN connections or multiple WAN devices on any Orbi.
First off, try LAG with just one modem if that one modem supports LAG as well. Your modem has to support LAG.
Darkknight007 wrote:Have been trying to setup the LAG/LACP(Step 7) for Nokia G-140W-C & Nokia G-140W-F however not sure how did one achieve dual wan. I have two different ISPs connected to thes modem+router units
