NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Netatmo Welcome camera issues with Orbi RBR752 (RBR750 router and RBS750 satellite)
This post is mostly to remember solution myself and maybe help someone else as I couldn't find anything in previous posts when faced these issues... I have used Netatmo Welcome camera with different...
I find that setting CTS/RTS Threshold to 2347 on Orbi AX systems works best for 2.4Ghz compatibility with older devices. Go to orbilogin.com, Advanced tab, Advanced section, Wireless Settings and change CTS/RTS Threshold for 2.4Ghz.
If that doesn't improve things, consider disabling AX mode for 2.4Ghz (uncheck the box in Advanced tab / Setup / Wireless Setup).
Changing CTS/RTS and disabling AX mode did not have any effect in my case - Netatmo Welcome camera kept disconnecting. Problem was solved only by changing preamble to Long.
Glad you got it working. Please mark your thread as solved so others will know. Be sure to save off a back up configuration to file for safe keeping. Saves time if a reset is needed.
https://kb.netgear.com/000062080/How-do-I-back-up-the-configuration-settings-on-my-Orbi-WiFi-System
Enjoy. 📡
rel234 wrote:
Changing CTS/RTS and disabling AX mode did not have any effect in my case - Netatmo Welcome camera kept disconnecting. Problem was solved only by changing preamble to Long.
