NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Netgear Orbi RBR750 + Telecom FTTH problema VLAN SLOW
I read around that there are problems with these firmwares to use the vlan and connect the orbi directly to the ont...how do you solve it?
the problem is only in wifi, don't ask me with which devices I do the tests, etc...before removing the TIM modem the Orbi router was working fine
https://community.netgear.com/t5/Orbi-Wi-Fi-5-AC-and-Orbi-with/RBR10-slow-internet-using-VLAN/td-p/2...
3 Replies
Something to ask the ISP about. If they require a VLan Configuration, then they will have this information and should be able to help you configure a router for this. Orbi router use DHCP or PPPoE or Static IP address configurations along with DHCP Options 60 and 61 on some models to get connected to ISP services that may have any one of these particular configuration requirements.
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
Be sure your using a good quality LAN cable between the modem and router. CAT6 is recommended.I read around that there are problems with these firmwares to use the vlan and connect the orbi directly to the ont...how do you solve it?
the problem is only in wifi, don't ask me with which devices I do the tests, etc...before removing the TIM modem the Orbi router was working fine
https://community.netgear.com/t5/Orbi-Wi-Fi-5-AC-and-Orbi-with/RBR10-slow-internet-using-VLAN/td-p/2218996
