New RBR850 / RBS850 Firmware Version 4.6.3.16 Released

Thanks for letting us know.

Be sure to save off a back up configuration to file for safe keeping. Saves time if a reset is needed.
https://kb.netgear.com/000062080/How-do-I-back-up-the-configuration-settings-on-my-Orbi-WiFi-System
Enjoy.

---

Zultan wrote:

This may sound crazy but it worked for me.  I am not a router guru so I won't even try to explain this but the solution for me was simple. 

 

I have Orbi RBR850 and 5 RBS850 satellites all running 4.6.3.16_2.0.51.  I was having all of the issues noted by others on a couple of the satellites.  (Constant rebooting, slow speeds, no clients attaching, dropping internet)

 

I noticed that the 3 closest to the router (about 30 feet)  were not having the constant reboot issue and were accepting clients while remaining stable with good transmission rates.  The two I have in the extreme corners of my home (60 feet away from router in opposite direction) were experiencing a constant reboot, low speeds, dropping internet, and not accepting wireless connections.  I reset, re-synced both of them and repositioned both of those satellites closer to the router (40 feet) and it resolved all of the issues.  Now all 5 satellites are functional. (At least for the past 36 hours).  I have since moved them back to their original positions and the system is totally stable.

 

I posted this under the RBR75? topic as well since it seem to be the same issue with the new firmware.

 

Hope this helps someone else.

 

---