Forum Discussion
Solved
No internet connection with WAN Aggregation
Hello community, today I configured the WAN port aggregation using RBK850 WAN+LAN1 ports. Starting from a working config with a single WAN port, I did the following: Enable WAN aggregation on RB...
OMG! This is clearly a wasting forum space thread 😅
The "newbie" issue was that I assigned, to the internet interface, an already used IP address... 🙄
Now, is working perfect, even if I got "only" 700 Mbps on my Samsung Galaxy s22+, while Orbi app reports 950 Mbps.
But that's ok for my needs, especially if I compare it with my last orbi RBR50
OMG! This is clearly a wasting forum space thread 😅
The "newbie" issue was that I assigned, to the internet interface, an already used IP address... 🙄
Now, is working perfect, even if I got "only" 700 Mbps on my Samsung Galaxy s22+, while Orbi app reports 950 Mbps.
But that's ok for my needs, especially if I compare it with my last orbi RBR50
Glad you got it working. Please mark your thread as solved so others will know. Be sure to save off a back up configuration to file for safe keeping. Saves time if a reset is needed.
https://kb.netgear.com/000062080/How-do-I-back-up-the-configuration-settings-on-my-Orbi-WiFi-System
Enjoy. 📡