No Wifi6/AX connection on Satellite

I am noticing that when I am connected to the RBS850 satellite I am not connecting via WiFi6/802.11ax, but when I connect to the main RBR850 router I am. Is this expected behavior or an issue? The ...

FURRYe38
Nov 17, 2019
I would factory reset both RBR and RBS and setup from scratch. I would temporarily bring the RBS into 20/30 feet distance range and setup the RBR. Then check the connection rate with your devices connected to the RBR. Be sure you turn OFF the wifi radios on these devices until after you get the RBS setup in it's temp location. After it's setup, turn ON the wifi radios on these devices and check the connection rate. If you can, please post screen captures of the rates on this devices please.

I would download wifi sweet spots on one of these devices and run this live to see the rate the app is dectecting while the device is connected to the RBS while near the RBS, say 4 feet away?

FURRYe38

Guru - Experienced User

Nov 16, 2019

You should be connected to AX if your devices support AX mode.

What FW are you using?

chinsk
Aspirant
Nov 16, 2019
3.2.7.2 on both
- FURRYe38
  Guru - Experienced User
  Nov 17, 2019
  Has a factory reset been performed on the RBR and RBS ands setup from scratch?
  
  Whats the distance between the RBR and RBS?
  - chinsk
    Aspirant
    Nov 17, 2019
    Have not, these have been in service less than a week and went right from their out of box firmware to the current rev. Distance is maybe 50 feet give or take

Forum Discussion

No Wifi6/AX connection on Satellite