NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
One device connected to RBS750 getting no internet access, all other devices are fine
Hi Orbi comminuty, I have 1 RBR 750 and 2 RBS750 setup in my home, the RBR was put upstairs and 2 RBS downstairs. All have been upgraded to the most recent firmware v4.6.9.11. All of a sudden...
Hi FURRYe38 , it is a double storey house, approx. 25SQ in total. I put one RBR upstairs next to the Modem, and two RBS downstairs. One RBS is in the study room and another on is in the living room on the other side of the house. I would say they all have more than 30 feet in distance. The RBS has no connection issues with the RBR as all my other devices (include mobile phone, laptop, iPad, camera, TV etc.) can access internet.
My phone (Huawei Mate 20 pro) has good internet connection when it's connected to the RBR upstairs. However when I moved downstairs, the phone switches its WIFI to the RBS and immediately it shows no internet connection. The Orbi app shows my two RBS loses connection with the RBR which I believe it's untrue as all my other devices have internet connection.
I will follow up your procedure to test it again. I will post the result here. Thanks.
- I think the issue that you have is caused by connectivity issues between router and the satellites.
When you check in the web GUI (orbilogin.com from any browser) under “Attached Devices” for your 2 satellites, do you see them connected on 2.4 or 5 GHz? Is the connection “Good”, “Weak”,….?
Do you have the possibility to get the satellites closer to the router?ekhalil In the web GUI, the two satellites are connected on 5GHz, and the connections are "Good".
I do not think its the connectivity issue, as the other devices in the same/near room connected to the same satellite all have good connection. That's why I think it is so weird and trying to find out if anyone else experienced the similar problem.
Sorry for the confusion FURRYe38 Here we use "SQ" to measure house size. I used the online conversion tools to find out that 25 SQ = 2500 sq ft = 232.2576 m2
Also I tried to follow exactly your procedure but it does not work.
Ok. Thanks for the confirmation.
For that size of home, the RBR and just one RBS would be needed. I would turn OFF one RBS and set the RBRs transmit power to 50%.
starluke wrote:
Sorry for the confusion FURRYe38 Here we use "SQ" to measure house size. I used the online conversion tools to find out that 25 SQ = 2500 sq ft = 232.2576 m2
Also I tried to follow exactly your procedure but it does not work.
Thanks for your suggestion, I will give it a go and post the result here.
