NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Orbi 760S Device / Network Uptime
For some reason the uptime displayed either within the router stats or the debug dont display the correct uptime, seems to think it only been up for 1 or 2 hours when in reality it hasnt been switche...
Generally, single digits CPU values, to maybe low 10's or teens. I don't have this system so I can't make a great comparison but from others postings and my own other Orbi 750, 850 and 9 series, most of them all hang in the range I mentioned. If we seem to see a creep upwards into the 20s, 30s and beyond, this could be some bad behavior in the system and could lead to seeing bad behavior or if the CPU gets to high, means the CPU temp could be high as well and over time, will damge the unit. Lets try to avoid this if we can.
Hello FURRYe38,
Thank you for the information on CPU load values. However, in this case the CPU that is seen by GarryJKing73 is expected.
Best,
Kevin
Community Team
Thank you for the information on CPU load values. However, in this case the CPU that is seen by GarryJKing73 is expected.
Best,
Kevin
Community Team
Would like to know if thats with all Orbi features enabled, like Armor, SPC and Traffic Meter, IPv6 and maybe Guest Network all running at the same time? Just kind seems a bit high and I would presume if these features were not enabled, the CPU usage seems like would be much lower running normally.