NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Orbi 960 and LIFX Bulbs
Latest version of firmware on Orbi.
Latest firmware on the LIFX bulbs
iPHONE 14 on WIFI - all the lights were initialised a year or so ago on a 2.4 ghz network so they are initialized correctly. ...
I did that for ONE of my down lights - yesterday - with the old settings it would not join.
With the new settings it joined this morning -
SO... I REALLY hope that I do not have to do this to 30 lights that require me to get on a ladder 30 feet in the air to rejoin them all.
Bill
TxBill wrote:
I did that for ONE of my down lights - yesterday - with the old settings it would not join.
With the new settings it joined this morning -
SO... I REALLY hope that I do not have to do this to 30 lights that require me to get on a ladder 30 feet in the air to rejoin them all.
Bill
If this is the problem (remembering MAC address of the AP), then I'm afraid you have to do that! 🙂
Please monitor this on one or two of the devices and then decide what you want to do. 🙂
I don't think that is the issue - now that I have changed the channel, and opened the CTS stuff ALL of my WEMO have come back on line and almost all of my LIFX bulbs.
So I am getting closer.
Bill
Ok. Keep an eye on things. Hope it will keep working for you.
Does anyone know the pattern of wireless connection that come out of the 960s?
Is it a sphere? an umbrella shape?
Is the signal strength a sphere around the unit or does it begin in a cirle around it and only go up like an umbrella?
Meaning -
If I put my main router in the attic will it give me a good connection to satellites that are slightly below it inside the house 30-40 feet away or do they need to be at a peer level?
Bill
