NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Orbi Hard wired connections drop
I have been having issues with this for months now. Everything will run fine for a while but then all my wired devices stop functioning. All my Wireless devices are fine. I set all my wired device...
RBR750 2 Satellites are RB750s
Latest version I can't get into my app or my web UI until I get the patch update that fixes that issue.
I have ATT service BGW320-500
My router connects to the ATT service. The Orbi does the DHCP and all wireless. Basically just use the ATT equipment as a modem.
Wired devices are my Orbi Satalites, PS5, Sony tv, Switch, gaming PC, Stereo system, VOIP system, Philips Hue Light controller, and Polisy smart home controler.
Armor is enabled and so was the traffic meter.
I am trying avoiding factory reset due to how some of my home automation stuff works. If I change the IPS it can cause me some issues.
Your ISP Modem already has a built in router and wifi. This would be a double NAT (two router) condition which isn't recommended. https://kb.netgear.com/30186/What-is-Double-NAT
https://kb.netgear.com/30187/How-to-fix-issues-with-Double-NAT
Couple of options,
1. Configure the modem for transparent bridge or modem only mode. Then use the Orbi router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.
2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ/ExposedHost or IP Pass-Through for the IP address the Orbi router gets from the modem. Then you can use the Orbi router in Router mode.
3. Or disable all wifi radios on the modem and connect the Orbi router to the modem, configure AP mode on the Orbi router. https://kb.netgear.com/31218/How-do-I-configure-my-Orbi-router-to-act-as-an-access-point and https://www.youtube.com/watch?v=H7LOcJ8GdDo&app=desktop
I would try option #2 first...
Try disabling Armor and Traffic Meter to see if anything changes as well...
- The att device is in passthrough mode. All the wifi is also disabled on it.