NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Orbi RBK352 Router cannot connect to the Internet
9. Reset the Orbi a second time as you suggested.
Is that factory reset too? So, you did factory reset twice, but you need to do the setup again after the second factory reset? I am facing the same problem, after factory reset my Orbi RBK352 Router cannot connect to the Internet, but my modem is fine, as I try another router can connect it. I try reset the modem, router and even factory rest the router, but it still cannot connect to the Internet.
3 Replies
Has a power off for 1 minute then back ON with the ISP modem and router been performed?
Be sure to restart your network in this sequence:
Turn off and unplug modem.
Turn off router and computers.
Plug in and turn on modem. Wait 2 minutes for it to connect.
Turn on the router and wait 2 minutes for it to connect.
Turn on computers and rest of network.What Firmware version is currently loaded?
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
Be sure your using a good quality LAN cable between the modem and router. CAT6 is recommended.It's been a while, but if I recall correctly it was 2 factory resets. My router has been rock solid again after going through this process.
Be sure to save off a back up configuration to file for safe keeping. Saves time if a reset is needed.
https://kb.netgear.com/000062080/How-do-I-back-up-the-configuration-settings-on-my-Orbi-WiFi-System
ClayCalhoun wrote:
It's been a while, but if I recall correctly it was 2 factory resets. My router has been rock solid again after going through this process.
