NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Orbi RBK852 4.6.3.16 broken (Solved)
This topic is only for the Netgear Orbi RBK852 / RBK853 / RBK854 / RBR850 Introduction: I bought my Netgear Orbi RBK852 last year. It's work fine and I am happy with that until they release 4.6...
- Especially with Netgear, always do a "Pin Hole Reset" after a "New Version Update" and input the operational information by hand. NEVER use a Backup File. Especially across different versions.
I would. Let us know.
One problem came up-- we have a ATA that I had set up through the Orbi. =>Modem -Orbi-ATA.
Since the latest firmsware we had internet connection to the ATA but it could not register. Put the ATA IP address on DMZ as a test and still it could not register. Opened IP Phone port- still it could not register.
Now I am going Modem -ATA - Orbi and all is good.
Not sure why ATA could not register through this latest firmware.
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
NGSvensk wrote:
One problem came up-- we have a ATA that I had set up through the Orbi. =>Modem -Orbi-ATA.
Since the latest firmsware we had internet connection to the ATA but it could not register. Put the ATA IP address on DMZ as a test and still it could not register. Opened IP Phone port- still it could not register.
Now I am going Modem -ATA - Orbi and all is good.
Not sure why ATA could not register through this latest firmware.
I have a Hitron 32x8, however I finally had he time to do a factory reset and set up the router and the satelite. Kind of weird but the ATA works again plugged in direct to the router Modem -Orbi-ATA.
I know it has been said before,,, factory reset does correct some issues..moving forward I will do a factory reset after firmware updates
Be sure to save off a back up configuration to file for safe keeping. Saves time if a reset is needed.
https://kb.netgear.com/000062080/How-do-I-back-up-the-configuration-settings-on-my-Orbi-WiFi-System
NGSvensk wrote:
I have a Hitron 32x8, however I finally had he time to do a factory reset and set up the router and the satelite. Kind of weird but the ATA works again plugged in direct to the router Modem -Orbi-ATA.
I know it has been said before,,, factory reset does correct some issues..moving forward I will do a factory reset after firmware updates