NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Orbi RBK852 is not reliable
I have recently purchased the RBK852 for my house and it has to be the worst purchase I have ever made regarding network equipment. Here are the reasons: I test my internet speed from the Orbi...
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
What is the size of your home? Sq Ft?
What is the distance between the router and satellite(s)? 30 feet is recommended in between RBR and RBS to begin with depending upon building materials when wirelessly connected. https://kb.netgear.com/000036466/How-far-should-I-place-my-Orbi-satellite-from-my-Orbi-router
What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?
MonkeyManor wrote:I have recently purchased the RBK852 for my house and it has to be the worst purchase I have ever made regarding network equipment.
Here are the reasons:
- I test my internet speed from the Orbi app and get 200+Mbps, my devices get 6-30 Mbps. They used to get 100+.
- My devices lose connection while using them and I have to reboot.
- Anytime I turn off my TV or my PS4 I have to delete the wifi connection and reestablish it when I turn the device back on.
- My devices connect to the Router upstairs at 2.4 GHZ vs the Satellite until 3 ft way at 5 GHZ.
It's just not operating as advertised and for the amount of money paid it should function. The model number is not in the drop down.
My firmware is the latest at this time.
In addition, I was on hold for an hour and the CS rep hung up on me.
Hi,
the Modem is Arris, Surfboard, SB6183.
Home Area is 2,800 Sq Ft.
I followed the link for the setup of the device. One upstairs on East side of house, One Downstairs on West Side.
Channels are Auto. I will try the other channels.
There are two wifi's in the neighborhood.
Be sure to check the CTS and RTS values as well.
- I have made the change CTS/RTS. I am still having a problem with the devices having great bandwidth and then dropping. For example, this device has been at 100+Mbs and then it will drop down to <1Mbp.
What is the distance between the RBR and RBS?
If you turn OFF the RBS, do you still see the drop in speed with the RBR only?