NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Orbi RBRE 960 drops WiFi clients several times a day
I recently installed a Orbi WiFi 6 RBRE960 router with two satellites. Both the satellites are connected over hardware backhaul. WiFi clients connected to both satellites randomly are dropped throug...
Update. I was able to get the connection between the Satellites and Router to be stable by switching from a hardwired backhaul to wireless backhaul. It is about 90% more stable now but still has a few issues. My "far away" satellite works great when it shows it is connected to the "not so far away" satellite for its connection. But randomly the "far away" satellite will connect directly to the router and it shows a poor backhaul status. I have no clue why it does this, there are no power outages or anything that I can tell would cause the backhaul connection to change.
Anyone else seeing this? I think I will post this as a new issue.
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
What is the size of your home? Sq Ft?
What is the distance between the router and 📡 satellite(s)? 30 feet or more is recommended in between RBR and RBS📡 to begin with depending upon building materials when wirelessly connected.
https://kb.netgear.com/31029/Where-should-I-place-my-Orbi-satellite 📡
What channels are you using? Auto? Try Auto and 48 on 5Ghz. Or try setting manual channel 1, 6 or 11 on 2.4Ghz and 40 to 48 channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?
Is the separate 6Ghz and IoT SSID broadcast enabled or disabled?
What devices do you have connected?
Are the RBS directly connected to the back of the RBR or is there a LAN switch in between.
What is the brand and model# of the switch being used?
Are you using he 2.5Gb LAN ports or the 1Gb LAN ports to connect the RBS to the RBR?
What CAT# lan cable are you using?
Thanks for the reply.
I don't think my issue is a signal strength problem. Wireless devices show full signal strength. They just loose connection. When I look at the iPad's WiFi setting (during the disconnect) the WiFi SSID is completely gone from the list. After a few moments it reappears and connects and works fine. What's a bit concerning is in addition to my SSID reappearing, I also see the NetGear's default IOT and Guest SSIDs appear in the available WiFi networks. The are there for a minute or two and disappear. I do not have those enabled! It almost appears as if the orbit satellite is rebooting or something??
My two satellites and router 2.4g ports, are plugged into a switch.
We live in a very rural setting no other WiFi hubs around.