NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Mstrbig
Jul 28, 2021Master
Orbi RBS750 Satellite continuous pulsating white light
I have a situation where an Orbi RBS750 satellite is stuck on pulsating white. I have performed all the normal steps to fix this. Performed a reset and still pulsating white. This malfunction happen...
Mstrbig
Jul 28, 2021Master
FURRYe38 wrote:What happens if you log in to the RBS web page. Still keeps pulsating?
Check the status on the RBS web page to see if it's fully synced an SSID and WPA modes are correct...
Remove the RBS from the RBRs web page then re-sync again?
That's the other strange thing.
When I plug a net cable in and log in to the RBS web page, it accepts username and password, then never fully populates the GUI home page. When I remjove the RBS from the RBR's web page, it cannot find the satellite when syncing.
FURRYe38
Jul 28, 2021Guru - Experienced User
After removing the RBS from the RBRs web page, reboot the RBR and after it's back to ready, press the sync button on the RBS then RBR?
- MstrbigJul 28, 2021Master
FURRYe38 wrote:After removing the RBS from the RBRs web page, reboot the RBR and after it's back to ready, press the sync button on the RBS then RBR?
Removed it, rebooted RBR, reset RBS, RBS never comes off pulsating white light.
- FURRYe38Jul 28, 2021Guru - Experienced User
Running out of idea here.
Only thing I might do is manually re-load FW again on the RBS, Remove it from the RBR. Reset the RBS then manual button press resync...try this in same room as RBR.
After that, you might contact Blanca_O and let her know...
- MstrbigJul 29, 2021Master
FURRYe38 wrote:Running out of idea here.
Only thing I might do is manually re-load FW again on the RBS, Remove it from the RBR. Reset the RBS then manual button press resync...try this in same room as RBR.
After that, you might contact Blanca_O and let her know...
I'm running out as well.
After extensive testing, now both RBS units are doing the same thing and the RBR is constantly going to pulsing white and re-connecting. I've run diagnostics on the ISP modem, contacted the ISP to see if there are issues in my area, changed out the cables, and all is fine. The only thing that has changed is Netgear pushed the new firmware that auto installed. I'm going to rollback the firmware to see if it solves the issue.