NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Orbi RBS850 stuck on boot loop
Hi Netgear Community! This is my first post and looking for a possible way to recovery my RBS 850 stuck on boot-loop. I already already tried a usb ttl converted to read the output but no luck. ...
Updates..
Putty
Client starts...[Listening] for ADVERTISE...
NMRP CONFIGING
Recv FW-UP option
No ST-UP option
NMRP WAITING FOR UPLOAD FIRMWARE or STRING TABLES!
start nmrp , change pwr led to solid amber
start nmrp , change pwr led to solid amber
ipq807x_eth_halt: done
eth0 PHY0 Down Speed :10 Half duplex
eth0 PHY1 Down Speed :10 Half duplex
eth0 PHY2 Down Speed :10 Half duplex
eth0 PHY3 up Speed :10 Full duplex
eth0 PHY4 Down Speed :10 Half duplex
10M speed not supported
ipq807x_eth_init: done
TftpServerStart()
Listening on Port : 69, IP Address: 10.164.183.253 ...
waiting nmrp server to upload firmware!
Tstart nmrp , change pwr led to solid amber
start nmrp , change pwr led to solid amber
ipq807x_eth_halt: done
eth0 PHY0 Down Speed :10 Half duplex
eth0 PHY1 Down Speed :10 Half duplex
eth0 PHY2 Down Speed :10 Half duplex
eth0 PHY3 up Speed :10 Full duplex
eth0 PHY4 Down Speed :10 Half duplex
10M speed not supported
ipq807x_eth_init: done
TftpServerStart()
Listening on Port : 69, IP Address: 10.164.183.253 ...
Rcv:
T T T T T T T T T T T T T T T T
==========================
D:\Download\nmrpflash-0.9.24-win32>nmrpflash.exe -i net3 -f RBS850-V7.2.6.31.chk
Advertising NMRP server on net3 ... |
Received configuration request from 08:36:c9:e0:d5:01.
Sending configuration: 10.164.183.253/24.
Received upload request: filename 'firmware'.
Uploading RBS850-V7.2.6.31.chk ... Timeout while waiting for ACK(1).
Does a 30-30-30 reset change anything?
Hi appreciate for your reponse but 30-30-30 does not do anything.
It seems that the LAN is not up hence cannot transmit the packets.
Latest updates
===============================
eth0 PHY0 up Speed :10 Full duplex
eth0 PHY1 Down Speed :10 Half duplex
eth0 PHY2 Down Speed :10 Half duplex
eth0 PHY3 Down Speed :10 Half duplex
eth0 PHY4 Down Speed :10 Half duplex
10M speed not supported
ipq807x_eth_init: done
TftpServerStart()
Listening on Port : 69, IP Address: 10.164.183.253 ...retry tftp_upload count exceeded;
TTTTT
Rcv:retry conf count exceeded;
Client starts...[Listening] for ADVERTISE...TTT
Retry count exceeded; boot the image as usual
ipq807x_eth_halt: doneFirmware recovering from TFTP server is stopped or failed! 😞
ipq807x_eth_halt: doneFirmware recovering from TFTP server is stopped or failed! 😞
ipq807x_eth_halt: doneFirmware recovering from TFTP server is stopped or failed! 😞
ipq807x_eth_halt: doneFirmware recovering from TFTP server is stopped or failed! 😞
ipq807x_eth_halt: doneFirmware recovering from TFTP server is stopped or failed! 😞
ipq807x_eth_halt: donenmrp server is stopped or failed !
==========================================================================================================================
D:\nmrpflash-0.9.24-win32>nmrpflash.exe -vvv -i net3 -f RBS850-V3.2.17.12-signed.chk -t 180000 -m 08:36:c9:e0:d5:01
nmrpflash 0.9.24
{0EAAB078-062E-4F23-8993-3562096C5431}: Type=6, Name=Ethernet
Waiting for Ethernet connection (Ctrl-C to skip).
Adding 10.164.183.252 to interface net3.
Advertising NMRP server on net3 ... |
Received configuration request from 08:36:c9:e0:d5:01.
Sending configuration: 10.164.183.253/24.
Received upload request: filename 'firmware'.
Using remote filename 'firmware'.
Uploading RBS850-V3.2.17.12-signed.chk ... << WRQ(firmware, octet)
Discarding TFTP_UL_REQ packet
<< WRQ(firmware, octet)
>> ACK(0)
<< DATA(1)
<< DATA(1)
<< DATA(1)
<< DATA(1)
<< DATA(1)
Timeout while waiting for ACK(1).