NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Orbi satellite disable 2.4g automatically
Hi all, I have a set of orbi RBK353 in my house. Someday I found all my IOT with 2.4g equipment are connected to my main router instead of the nearest satellite. So some of my IOT equipment got weak...
Hello!
Didn't set the 2.4G transmission below 100%?
I also had this problem, but with this setting ok:
what firmware is on the router and the satellites?
Did you try a simple factory reset on the satellites and re-synce?
plemans wrote:what firmware is on the router and the satellites?
Did you try a simple factory reset on the satellites and re-synce?
RBR350(router):V4.4.0.10_2.10.63
RBS350(satellites):V4.4.0.10
No, I have not trying a factory reset. Does it helpful? Maybe I can try this!
By the way, all satellites are connected to router by ethernet cable.
No, I have not trying a factory reset. Does it helpful? Maybe I can try this!
It can be a quick fix sometimes.
- It can be that the satellite is seeing too much disturbances on the 2.4 GHz band and is therefore blocking it?
Are you using “Auto” in your 2.4GHz channel selection settings? Please try changing to a fixed channel. Select a channel that isn’t being used in the area.
If you already use a fixed channel then please try to change to another channel and see if this will solve the issue.
firmware version display in image and posted on message.
And yes. I did tried factory reset and resync it totally not working!!!
Thanks.
