RBR 852 frequently disconnects.

What Firmware version is currently loaded?

Be sure RBS have same version of FW loaded as whats on the RBR.

What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?

What is the size of your home? Sq Ft?
What is the distance between the router and 📡 satellite(s)? 30 feet or more is recommended in between RBR and RBS📡 to begin with depending upon building materials when wirelessly connected.
https://kb.netgear.com/31029/Where-should-I-place-my-Orbi-satellite 📡

What channels are you using? Auto? Try Auto and 48 on 5Ghz. Or try setting manual channel 1, 6 or 11 on 2.4Ghz and 40 to 48 channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?

Try disabling the following and see:
Armor

Set 20/40Mhz Coexistence to 40Mhz only. Set CTS to 2347. Set Short preamble instead of Long preamble modes. Save settings and reboot the router and satellite(s). Under Advanced Tab/Advanced Settings/Wireless Settings

---

ZOOShen wrote:

I have been experience RBS connected devices disconnects from internet the every few minutes. I have two RBS 852 connected to the RBR 852. Both RBS are having the same problem. I am sure that I upgraded to the latest firmware.

 

I come accross this forum, and few of use has experience same.

 

Anyone could help here?

---