RBR750 — Orbi WiFi 6 Router AX4200 / DNS server configuration

What browser are you using to configure DNS? 

What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?

If, your ISP Modem already has a built in router and wifi. This would be a double NAT (two router) condition which isn't recommended. https://kb.netgear.com/30186/What-is-Double-NAT
https://kb.netgear.com/30187/How-to-fix-issues-with-Double-NAT
Couple of options,
1. Configure the modem for transparent bridge or modem only mode. Then use the Orbi router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.
2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ/ExposedHost or IP Pass-Through for the IP address the Orbi router gets from the modem. Then you can use the Orbi router in Router mode.
3. Or disable all wifi radios on the modem and connect the Orbi router to the modem, configure AP mode on the Orbi router. https://kb.netgear.com/31218/How-do-I-configure-my-Orbi-router-to-act-as-an-access-point and https://www.youtube.com/watch?v=H7LOcJ8GdDo&app=desktop
Try option #2 first...

---

Jorgee wrote:

Hello everyone,

I have a mesh system (RBR750) with firmware version V7.2.6.21_5.0.20. My router is behind of ISP's router.

I want to configure the option "Use these DNS servers". I did the configuration and save it, but i did not work.

Can anyone suggest any configuration or final solution?

Thanks in advance

Jorge

---