NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RBR750 - iOS devices fail to get IP address from Orbi + frequent disconnects
For the past 6 months or so, my Orbi RBR750 router & 2 satellites are struggling to keep iPhone & other mobile devices connected to the router. Wifi will drop serveral times during the day. Sometime...
CTS Threshold for both 2.4hz and 5Ghz was already set to 2347
Enable AX > Enable 2.4G
Diabling this will not disable the 2.GHz channel as I have several IoT devices that need to be on 2.4Ghz.
CTS Threshold for both 2.4hz and 5Ghz was already set to 2347
Enable AX > Enable 2.4G
Diabling this will not disable the 2.GHz channel as I have several IoT devices that need to be on 2.4Ghz.
No. Just the AX mode is all.
Thanks, disabled it. Will update this thread tomorrow on how that went.
đ
Has a power off for 1 minute then back ON with the ISP modem and Orbi system been performed since last update?
Nope not since last update as its hard to tell when the firmware updates itself automatically.
You are suggesting:
- Power off ISP modem
- Power off Orbi
- Power on ISP modem
- Once ISP modem is online, wait 1 min
- Power on Orbi?