NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RBR850 wired backhaul satellite connection partially working
I've just upgraded from a RBR750 to a RBR850 (in AP mode), and now have 2 satellites. One (RBS850) on another floor of the building where my terrace is; with a wired connection that goes direct....
If the RBS750 works directly connected to the back of the RBR850, then seems to not work right when connected thru your QNAP switches, would most likely be these particular branded switches causing problems. Thought this brand reports it as a unmanaged switch, possible some features that are included with in the switche, maybe causes problems or the switch is not allowing all data between the RBR and RBS to flow. Seen this before with other branded switches. Managed switches can also be a problem.
Also check for cabling in between this on remote location as well.
Swap the RBS850 into this one location to see if problem is seen with the RBS850.
Recommend a NG non managed switch from this model line: NG GS-105/108v4 and GS308v3
All models tested with both 750 and 850 series Orbi systems.