NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RBR850/RBS850/RBS850 issues
Is there anyway to force the backhaul through another Satellite all the time? I have a Router in the basement, wired to a Satellite on the top floor in a window facing my Shop with Line of Site to a...
What Firmware version is currently loaded?
What is the size of your home? Sq Ft?
What is the distance between the router 📡 and satellite(s)🛰️? 30 feet or more is recommended in between RBR 📡 and RBS 🛰️ to begin with depending upon building materials when wired or wirelessly connected.
https://kb.netgear.com/31029/Where-should-I-place-my-Orbi-satellite 🛰
Try turning down the power output of the RBRs wifi radios from 100% to 50% and see if this changes anything. Under Advanced Tab/Advanced Settings/Wireless Settings
House is 3000' at the bottom of the hill, 300' from the house to the Shop window, shop is metal, then 100' of Cat6 to a satellite in the back yard on a 20' pole. The last satellite can not see anything without the wire to the shop satellite.
Firmware V7.2.6.31_5.0.24
There is a good 200' of dirt between the router and the shop... no idea why it keeps switching to it.
Try lowering the power to 25% and see.
What is the distances between the RBR and the 1st RBS closest to the house?
Has a power cycle OFF for 1 minute then back ON or factory reset been performed since v.31 was applied?
Ya thats quite a ways in between.
kildren wrote:
House is 3000' at the bottom of the hill, 300' from the house to the Shop window, shop is metal, then 100' of Cat6 to a satellite in the back yard on a 20' pole. The last satellite can not see anything without the wire to the shop satellite.
Firmware V7.2.6.31_5.0.24
There is a good 200' of dirt between the router and the shop... no idea why it keeps switching to it.
Well I moved the router to the 3rd floor , and the satellite to the basement. Everything is showing good strength now and so far has stayed stable. I can connect to all 3 satellites via their IPs really fast now, before it was slow to respond, figured that was how it updated, now I see I was wrong..
Good thing I ran 2 CAT6 up to the 3rd floor...
Check back with us in 3 days to let us know how it does.
Ya, basements are not good places for the main RBR.
Hope it keeps working good for you...