NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RBRE960 outdoor satellite compatibilty
I need to add an outdoor satellite module to my mesh system. I having a solar system and it needs to connect to my home wifi. My signal reaches out that far but the solar system will be mounted on t...
The solar system will almost certainly require only a 2.4G WiFi signal (not much data requirement). 2.4H WiFi is usable much farther away than 5G.
If the signal actually is too weak, I would place an ordinary "WiFi Extender" (of any brand) on the inside of the house close to the solar control panel, but not where a metal enclosure will obviously block the radio signal.
Something like a Netgear EX3700 or TP-Link RE220. The solar panel is not a mobile device, so there is no need for "true satellite" capability (seamless roaming).
The problem is also that the solar is a ground mount system and the all the equipment is to be mounted on the outside of the all metal shop around the corner so the signal is blocked. I need to put an outdoor satellite like you used to able to do with RBK50.
Thanks
Any chance this solar device has a ethernet port?
I don't know until they come out to install. It is an Enphase system.
Dan
I'd ask them if its ethernet supporting, if it is, then to avoid having to install a wifi something out there, a ethernet cable, CAT6A STP to the remote building would be recommended. Then add on a non managed switch in the building and then connect this device to this switch for best connection.
