NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RBS750 & RBR750
I updated my RBR750 router and the RBS750 Satellites a few days ago however one Satellite I have is showing as disconnected on the web UI. I have reset it and removed it from the Attached Devices page...
If you use same SSID name and PW, devices will re-connect on there own.
Possible the RBS FW level if not updated first before the RBR is, could cause this...
So the update page is showing the Router with V7.2.6.31 Firmware then it shows three of my RBS Satellites have V7.2.7.15 Firmware. Then the other RBS isn’t even showing up on the update page. Also one of the satellites says Update Failed. But that Satellite is showing up on the Firmware update page.
Ok I see one of the RBS750s is showing RBS750QV. Something another poster contacted me about.
This needs to get over to NG since we are seeing two systems that exhibit this issue.
JasGr81 wrote:
So the update page is showing the Router with V7.2.6.31 Firmware then it shows three of my RBS Satellites have V7.2.7.15 Firmware. Then the other RBS isn’t even showing up on the update page. Also one of the satellites says Update Failed. But that Satellite is showing up on the Firmware update page.- What does that mean?
Just linking myself to this conversation. I'm the other poster Furry has been working with today after FW. 7.2.7.15 fails to install on my RBS750 and yet changes the Model Name to RBS750QV in the web interface in my photo above.
I've made NG aware of this.
I guess for now, use the system with prior working version of FW. Blackdogaudio
For the one RBS that didn't seem to update, can you use the system with out that RBS is is that needed?
May need to possiblty downgrade the system back to prior working version of FW.
I'll see what NG needs from you both, debug logs maybe needed. Please be patient.
