NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RBS850 not detected by router
My network includes one RBR850 + one RBS850 which came in one package, I later added another RBS850. The new satellite was added successfully to the network. The router and satellites are connected...
If your ISP Modem already has a built in router and wifi. This would be a double NAT (two router) condition which isn't recommended. https://kb.netgear.com/30186/What-is-Double-NAT
https://kb.netgear.com/30187/How-to-fix-issues-with-Double-NAT
Couple of options,
1. Configure the modem for transparent bridge or modem only mode. Then use the Orbi router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.
2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ/ExposedHost or IP Pass-Through for the IP address the Orbi router gets from the modem. Then you can use the Orbi router in Router mode.
3. Or disable all wifi radios on the modem and connect the Orbi router to the modem, configure AP mode on the Orbi router.
https://community.netgear.com/t5/Orbi-WIFI-6-AX-AND-Wi-Fi-6E-AXE/Procedure-for-Factory-reset-of-RBS850/m-p/2367505/highlight/true#M53985
https://kb.netgear.com/31218/How-do-I-configure-my-Orbi-router-to-act-as-an-access-point and https://www.youtube.com/watch?v=H7LOcJ8GdDo&app=desktop
Try option #2 first...
Does this show as offline on the RBRs web page as well? Or just in the Orbi app?
What CAT# LAN cables are used to connect the RBS to the RBR? CAT6 is recommended.
What is the size of your home? Sq Ft?
What is the distance between the router 📡 and satellite(s)🛰️? 30 feet or more is recommended in between RBR 📡 and RBS 🛰️ to begin with depending upon building materials when wired or wirelessly connected.
https://kb.netgear.com/31029/Where-should-I-place-my-Orbi-satellite ‌‌🛰
Be sure to disable any MAC Address randomizers on phones and pads while at home:
https://community.netgear.com/t5/Orbi-App/NETGEAR-Mobile-Applications-and-Apple-Devices-FAQ/td-p/2220016/jump-to/first-unread-message
Thanks,
I'm unable to access the RBR850 from the webpage, Browsing to orbilogin.net or 192.168.1.1 fails to connect, so my only access is via the app. The ip address for the router in the app is 10.0.0.1.
My house is routed with CAT6 cables and the RBS is connected to the switch with CAT6.
My house size is 350 sqr meters (about 3500 sqr feet) and I have 3 floors, the router is connected on the ground floor, with one RBS installed in the basement and on on the second floor.
Can you access the RBRs web page at 10.0.0.1?
I can ping 10.0.0.1 but I can't access the webpage on this address