NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
CBK752 Modem is very unstable, can i use just as a router
I have the CBK752 with one sattelite, when it is working it is great. However, it losses its internet connection almost daily, only way to get it back on is to unplug and plug back in. So, is there a...
Well I tought it was a wifi issue as my cameras notified me that they went off line then came back. One never got back online and I had to power cycle it off then back ON. This this morning I notcied that the CBR had lost connection, seem to reboot on it's own and was pulsating WHITE. I couldn't log into it's web page until it recovered. I found a few un-correctables and correctables being reported. Made me think that I didn't see this with my CAX80 which I had on prior to putting the CBR online last friday. I checked the coax cable line and I found that I had not fully tightend the barrel connector that lead up to the CBR. After re-tightening this connector and doing a full on reboot, correctables and un-correctables are all zero's now. I'm waiting to see if the cameras still report going off line or not. I'll be checking on this during this week. I may have been thinking it was a wifi issue when it may have been a CBR signal and reboot issue.
RBS is ethernet connected.
CTS is default factory
Both CBR and RBS are on latest FW versions.
AX mode is enabled on both frequencies.
Transmit power set to 50% on both radios.
Traffic Meter enabled and set to No Limit. Armor and SPC enabled on trial.
rmarcare wrote:
interesting, so you have had the same intermittent wifi issues as well? i have only been able to save the routers debug log not the satellite, which may be another obstacle to overcome (not sure if you have heard this). also, the most recent intermittent wifi issue for me did not include a magenta LED light
Thanks for instant reply FURRYe38 , further follow-up for clarification
Both CBR and RBS are on latest FW versions. (Al - What are the precise version numbers - CBR -V4.6.5.8_2.0.54, RBS -V4.6.7.5 )?
Thanks,
Al
FURRYe38 wrote:Well I tought it was a wifi issue as my cameras notified me that they went off line then came back. One never got back online and I had to power cycle it off then back ON. This this morning I notcied that the CBR had lost connection, seem to reboot on it's own and was pulsating WHITE. I couldn't log into it's web page until it recovered. I found a few un-correctables and correctables being reported. Made me think that I didn't see this with my CAX80 which I had on prior to putting the CBR online last friday. I checked the coax cable line and I found that I had not fully tightend the barrel connector that lead up to the CBR. After re-tightening this connector and doing a full on reboot, correctables and un-correctables are all zero's now. I'm waiting to see if the cameras still report going off line or not. I'll be checking on this during this week. I may have been thinking it was a wifi issue when it may have been a CBR signal and reboot issue.
RBS is ethernet connected.
CTS is default factory
Both CBR and RBS are on latest FW versions. (Al - What are the precise version numbers - CBR -V4.6.5.8_2.0.54, RBS -V4.6.7.5 )?
AX mode is enabled on both frequencies.
Transmit power set to 50% on both radios.
Traffic Meter enabled and set to No Limit. Armor and SPC enabled on trial.
rmarcare wrote:interesting, so you have had the same intermittent wifi issues as well? i have only been able to save the routers debug log not the satellite, which may be another obstacle to overcome (not sure if you have heard this). also, the most recent intermittent wifi issue for me did not include a magenta LED light