NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
New - RBR850 / RBS850 Firmware Version v4.6.7.5 Released
No Release Notes at this time. I'll see if I can get some.
Download Link:
https://ntgr.my.salesforce.com/sfc/p/#300000000xsV/a/8b000000saFy/gnaaQgriSv_NWgvrN.dvn786cl4eG45R2.62LEI3edU
F...
Do this, take 1 RBS to same room as RBR and connect it directly to the back of the RBR with out the D-Link switch in the middle. Let us know it it shows up as a Wired connection on the RBRs web page. So same for 2nd RBS as well.
FURRYe38 wrote:Do this, take 1 RBS to same room as RBR and connect it directly to the back of the RBR with out the D-Link switch in the middle. Let us know it it shows up as a Wired connection on the RBRs web page. So same for 2nd RBS as well.
It does show wired Coneected
So with the D-Link switch in the middle does the RBS connect to the RBR and show wired?
jcsimas wrote:
FURRYe38 wrote:
Do this, take 1 RBS to same room as RBR and connect it directly to the back of the RBR with out the D-Link switch in the middle. Let us know it it shows up as a Wired connection on the RBRs web page. So same for 2nd RBS as well.
It does show wired Coneected
FURRYe38 wrote:So with the D-Link switch in the middle does the RBS connect to the RBR and show wired?
Yes...the problem will be freezing
jcsimas wrote:
FURRYe38 wrote:Do this, take 1 RBS to same room as RBR and connect it directly to the back of the RBR with out the D-Link switch in the middle. Let us know it it shows up as a Wired connection on the RBRs web page. So same for 2nd RBS as well.
It does show wired Coneected
Freezing meaning?
jcsimas wrote:
FURRYe38 wrote:
So with the D-Link switch in the middle does the RBS connect to the RBR and show wired?
Yes...the problem will be freezing
jcsimas wrote:
FURRYe38 wrote:
Do this, take 1 RBS to same room as RBR and connect it directly to the back of the RBR with out the D-Link switch in the middle. Let us know it it shows up as a Wired connection on the RBRs web page. So same for 2nd RBS as well.
It does show wired Coneected
meaning Conection falling every 10m, speedtests dont even even start and the speeds stall. totally unusable network
FURRYe38 wrote:Freezing meaning?
jcsimas wrote:
FURRYe38 wrote:So with the D-Link switch in the middle does the RBS connect to the RBR and show wired?
Yes...the problem will be freezing
jcsimas wrote:
FURRYe38 wrote:Do this, take 1 RBS to same room as RBR and connect it directly to the back of the RBR with out the D-Link switch in the middle. Let us know it it shows up as a Wired connection on the RBRs web page. So same for 2nd RBS as well.
It does show wired Coneected
I would try a different swtich. This rev version of the switch has some green ethernet that maybe interfering between the RBR and RBS when it's in the middle.
NG GS-105/108v4 and GS308v3, D-Link DGS-105/108 Rev A and HP ProCurve 1400/1800 series switches work for Orbi systems.
FURRYe38 wrote:I would try a different swtich. This rev version of the switch has some green ethernet that maybe interfering between the RBR and RBS when it's in the middle.
NG GS-105/108v4 and GS308v3, D-Link DGS-105/108 Rev A and HP ProCurve 1400/1800 series switches work for Orbi systems.
I ll try to get a new one tomorrow...but it happens as well when it s directly connected to the RBR...i tried that as well
Be sure your using good quality LAN cables. CAT6 is recommended.
jcsimas wrote: I ll try to get a new one tomorrow...but it happens as well when it s directly connected to the RBR...i tried that as well
jcsimasThis morning I installed my brand new 853 setup and followed the guide installing 4.6.7.5
So far I see big imprevements compared with my old Nighthawk MK63 system.
One question, how do I disable automatic firmware update. I can't see the option under advanced, administration, firmware update?
On my old Nighthawk system it was located in the buttom of the screen.
I found this thread. But maby its because i'm a newbie... but I can't seem to find a guide / solution how to do it.
Thanks alot in advance.
Strange... FW. 4.6.7.5 issus with my second sattelite in my kidsroom showing poor backhaul status... sometimes out of sync.
But he is playing Fortnite in his room and he says its playing flawless??
Eriksen76 wrote:This morning I installed my brand new 853 setup and followed the guide installing 4.6.7.5
So far I see big imprevements compared with my old Nighthawk MK63 system.
One question, how do I disable automatic firmware update. I can't see the option under advanced, administration, firmware update?
On my old Nighthawk system it was located in the buttom of the screen.
I found this thread. But maby its because i'm a newbie... but I can't seem to find a guide / solution how to do it.
Thanks alot in advance.
There is no option in the setup to do this in Orbi.
