NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RBR850 - Satellites will not appear in web interface
I've had these set up for a while in Router mode. Satellites worked flawlessly. I moved them to a hardwired back channel. Still worked flawlessly. But when I flipped them to AP mode they all three...
Retired_Member wrote:I have all three (router and both satellites) plugged into a switch and the switch plugged into the LAN side of a modem.
Are you saying the satellites need to connect to the router and the router then connects to the LAN side of the modem?
I have all three (router and both satellites) plugged into a switch and the switch plugged into the LAN side of a modem.
Are you saying the satellites need to connect to the router and the router then connects to the LAN side of the modem?
Retired_Member wrote:I have all three (router and both satellites) plugged into a switch and the switch plugged into the LAN side of a modem.
Are you saying the satellites need to connect to the router and the router then connects to the LAN side of the modem?
I marked this as "the" solution because anyone with this issue should start here...but the others were the ones that helped me "understand" what this says.
It takes a village to build a network.
Thanks gents!
Glad you got it resolved!
Let us know if you have other issues and we're happy to help
Be sure to save off a back up configuration to file for safe keeping. Saves time if a reset is needed.
https://kb.netgear.com/000062080/How-do-I-back-up-the-configuration-settings-on-my-Orbi-WiFi-System
Retired_Member wrote:
I marked this as "the" solution because anyone with this issue should start here...but the others were the ones that helped me "understand" what this says.
It takes a village to build a network.
Thanks gents!
