NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Several issues with Orbi Mesh Wifi
System: RBR750 router in AP mode with two RBS750 satellites connected via ethernet, both directly to the router 1000/1000 fiber using Nokia Gateway 3 (G-240W-E) ONT with WiFi disabled I have ha...
The IP address error has happened on two phones, both Samsungs (Note9 and Galaxy S8+) and happens once every several days. I haven't noticed it happening after using a specific app or website. When clicking on more information about the error, it states:
"Your phone couldn't get an IP address from the router. Try turning the router off, then on again. If the router doesnt belong to you, try contacting the owner. Is the router being used by many people? If all available IP addresses are being used, it may not be possible to connect to the network. It may help to set a shorter IP address lease time in your renter's DHCP settings."
I only have 16 devices connected to the network and have restarted the router several times without change.
I havent changed any DHCP settings from the default. The only settings change I made was to put the router into AP mode in attempt to solve the IP address issue which made no difference.
The Roku is about 20 ft from the router with a wall in between and about 30 feet from the closest satellite with nearly a direct line of sight, just slightly around one corner. Other devices perform just fine around it and I'm showing around -45dbm on the app. The Roku performs better on 2.4GHz when it changes over but there isn't a way I have found to manually select the frequency.
"Your phone couldn't get an IP address from the router. Try turning the router off, then on again. If the router doesnt belong to you, try contacting the owner. Is the router being used by many people? If all available IP addresses are being used, it may not be possible to connect to the network. It may help to set a shorter IP address lease time in your renter's DHCP settings."
I only have 16 devices connected to the network and have restarted the router several times without change.
I havent changed any DHCP settings from the default. The only settings change I made was to put the router into AP mode in attempt to solve the IP address issue which made no difference.
The Roku is about 20 ft from the router with a wall in between and about 30 feet from the closest satellite with nearly a direct line of sight, just slightly around one corner. Other devices perform just fine around it and I'm showing around -45dbm on the app. The Roku performs better on 2.4GHz when it changes over but there isn't a way I have found to manually select the frequency.
How is the RBR connected to the ISP ONT? Using the WAN port on the back of the RBR to the ISP ONT?
If your still having problems with these two devies and DHCP when in AP Mode, i would check with your ISP ONT router since you have a built in router with the ONT. Set IP address reservations there for these two devices.
This would be a double NAT (two router) condition which isn't recommended. https://kb.netgear.com/30186/What-is-Double-NAT
https://kb.netgear.com/30187/How-to-fix-issues-with-Double-NAT
Couple of options,
1. Configure the modem for transparent bridge or modem only mode. Then use the Orbi router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.
2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ/ExposedHost or IP Pass-Through for the IP address the Orbi router gets from the modem. Then you can use the Orbi router in Router mode.
3. Or disable all wifi radios on the modem and connect the Orbi router to the modem, configure AP mode on the Orbi router. https://kb.netgear.com/31218/How-do-I-configure-my-Orbi-router-to-act-as-an-access-point and https://www.youtube.com/watch?v=H7LOcJ8GdDo&app=desktop
Try option #2...
Be sure your ISP ONTs wifi radios are fully OFF or Disabled.
Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?
Check with the mfr of these devices as well. If other devices are working and these two are not, there maybe a problem with these two devices.
Orbz wrote:
The IP address error has happened on two phones, both Samsungs (Note9 and Galaxy S8+) and happens once every several days. I haven't noticed it happening after using a specific app or website. When clicking on more information about the error, it states:
"Your phone couldn't get an IP address from the router. Try turning the router off, then on again. If the router doesnt belong to you, try contacting the owner. Is the router being used by many people? If all available IP addresses are being used, it may not be possible to connect to the network. It may help to set a shorter IP address lease time in your renter's DHCP settings."
I only have 16 devices connected to the network and have restarted the router several times without change.
I havent changed any DHCP settings from the default. The only settings change I made was to put the router into AP mode in attempt to solve the IP address issue which made no difference.
The Roku is about 20 ft from the router with a wall in between and about 30 feet from the closest satellite with nearly a direct line of sight, just slightly around one corner. Other devices perform just fine around it and I'm showing around -45dbm on the app. The Roku performs better on 2.4GHz when it changes over but there isn't a way I have found to manually select the frequency.