NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Using Orbi wifi 6 AX4200 with the new T-Mobile Home Interne gateway chimney
I am trying to connect my ORBI AX4200 to the new T-Moble Home Internet Gateway 5G chimney. I have tried changing the ORBI to an access point only but it keeps rebooting itself several times a day an...
What Firmware version is currently loaded?
Should not take 10 minutes for the system to reboot. If it is, there maybe a problem with the Orbi system and needs to be replaced.
Check the LAN cable in between the modem and RBR. CAT6 is recommended.
Be sure to use the Yellow LAN port for either router or AP mode to the ISP modem.
1. Configure the modem for transparent bridge or modem only mode. Then use the Orbi router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.
2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ/ExposedHost or IP Pass-Through for the IP address the Orbi router gets from the modem. Then you can use the Orbi router in Router mode.
3. Or disable all wifi radios on the modem and connect the Orbi router to the modem, configure AP mode on the Orbi router. https://kb.netgear.com/31218/How-do-I-configure-my-Orbi-router-to-act-as-an-access-point and https://www.youtube.com/watch?v=H7LOcJ8GdDo&app=desktop