NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
VPN ip address change
Hello. I have two systems RBRE960 and RBR850. Both activated VPN service. The problem is that they both have save VPN IP/subnet 192.168.254.1, so I could not connect to both of them at the same time...
Ok, then seems that 192.168.254.x is hard coded in Orbi.
Previously when the CLI interface (telnet was open in Orbi we could easily change this, but unfortunately now I don’t think there is anything we can do.
Previously when the CLI interface (telnet was open in Orbi we could easily change this, but unfortunately now I don’t think there is anything we can do.
What parameter would one set using a command line interface (telnet) to manage the IP subnet assigned to VPN connections?
- Idle curiosity. Would like to see what happens when I try it on a test system.
- I have heard rumors of a way to enable telnet on the AX products This might prove to be a solution to this specific circumstance.
- Only the following parameter needs to be changed:
openvpn_tun_ipaddr=192.168.254.1