NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Adding router to office network so I have wifi in my house
I have a home office located about 150 feet behind my house. When we upgraded to a Cable mode they installed everything in the office and ran a single line to the house, where I used an old Netgear r...
I finally called tech suppport. It turns out my router had been previously configured (a return?) and they needed to do a complete reset. After that it configured itself and works perfectly now.`
Thanks to all of you that replied!
So first lets setup how you have your office laid out.
Look at my signature and go over you modem, routers, switches, etc.
Reason I say this is from youreading your description, I'm not sure if you have other routers running as well or not.
If you're using more than 1 router, the 2nd one would be in access point mode.
You should be able to name the 2nd router with a different ssid and user a different wireless channel to prevent intererence.
NOTE: This is NOT an RAX40, this is a RAX45 6 stream wifi router (aka AX4300), which is not listed here.
The cable enters and goes to the cable model, then feeds into a router from the cable company. It appears to be their own oem from China, and this one supplies wifi in the office. Then I have a single line going from this router to the house, where the wifi signal is not strong enough, and I have 4 wired computers connected, along with the TV's using a few switches, but everything is downstream from the router and was working fine before. I bough the new router to provide a better signal for the house because my old one was 7=9 years old. The wired portion works but the wifi does not. Some have mentioned the configuration should be set at "access point mode" but, because there is no documentation, I was just following the normal setup (which died and didn't work).
If it is, in fact, that I need to use the "access point mode" is there anywhere I can find a A-B-C explaination or something easy to follow?I finally called tech suppport. It turns out my router had been previously configured (a return?) and they needed to do a complete reset. After that it configured itself and works perfectly now.`
Thanks to all of you that replied!glad you got it figured out!
Sorry i didn't get back to you before you figured it out, jobs are kind of buzz kills on spending time on here :)