NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Connection is dropped to WAN precisely at 4am ET (for my timezone) and no WiFi
Had this started to happen about a week ago with a Nighthawk RAX50v2. Connection is dropped to WAN precisely at 4am ET (for my timezone) and no WiFi or DHCP is running either - all hosts are disconn...
My mistake on red light, only when I have to reboot via push switch every morning when I wake up. When I find the device in mornjng all white lights, essentially.
Re: time of shutdown - I run services that are always on and require WAN access and their logs indicate drops at precisely 4AM ET every day. unfortunately I’m recovering from a flu and haven’t had opportunity to noodle much more.
I suspect some incomplete firmware push. A little over a week ago was prompted to update and tried and the router never rebooted but also no network either. Reboot got me back to 1.1.3.18. I should have never updated firmware - usually more trouble than worth when device is performing fine. I will exhaust all troubleshooting steps prior to a factory reset. Will try manual firmware load from web admin console.
Re: time of shutdown - I run services that are always on and require WAN access and their logs indicate drops at precisely 4AM ET every day. unfortunately I’m recovering from a flu and haven’t had opportunity to noodle much more.
I suspect some incomplete firmware push. A little over a week ago was prompted to update and tried and the router never rebooted but also no network either. Reboot got me back to 1.1.3.18. I should have never updated firmware - usually more trouble than worth when device is performing fine. I will exhaust all troubleshooting steps prior to a factory reset. Will try manual firmware load from web admin console.
Seems as if the router’s GUI in admin console got a significant update. *many* more settings and even things like scheduled wireless signal on / off times. All schedules are not set and disabled, but very intriguing. I also have Ethernet connected devices that get connectivity dropped so that feature alone malfunctioning wouodnt explain this.
