NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Neatgear EAX20 AT1800 mesh extender clignote orange depuis plus de 36 heures
Bnojour j'ai un Netgear EAX20 AX1800 Mesh extentender. Apres installtion il a redemarrer en mettant a jour le firmaware. Cela fait plus de 36 heures que celui-ci clignote orange sur la 1ere led e...
sounds like it might have gotten corrupted during the update process.
You can try a factory reset by pushing and holding reset while its powered on for 7-15 seconds.
If that doesn't work, you can try recoving it with tftp or nmrpflash.
are you on windows? if so, follow this guide
https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP
just make sure you enable tftp
https://www.thewindowsclub.com/enable-tftp-windows-10
and here's a video walk through using a tftp client. Use the built in one for windows 10 though. the video is more of an example of how its done.
https://www.youtube.com/watch?v=R9DLrLQrpaw
and if that doesn't work, you can try using nmrpflash
Merci pour toutes vos solutions malheureusement aucune des options n'a fonctionnées.
Il part en SAV.
Cordialement