NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

guccia123's avatar
guccia123
Aspirant
May 31, 2023
Solved

Netgear RAX120V2 NANC

Hi,   Had Beta firmware 1.2.8.43-RC on my RAX120V2. Now I rolled back to 1.2.8.40. Main Reason for roll back was Temperature was showing NANC and auto fan wasn't working.   After rolling back (wi...
  • FURRYe38's avatar
    FURRYe38
    Nov 08, 2023

    Not seeing this on my RAX120v2 on v.52 FW:

    There is no AUTO FAN. You can enabled it for being always ON but I believe this setting doesn't persist thru a power cycle or reboot of the router.

     

    MS Edge is browser I use.

    guccia123 ssssss 

FURRYe38's avatar
FURRYe38
Guru
May 31, 2023

Factory reset and setup from scratch. Should clear our any lingering bad code. I believe NG disabling some of the debug items in the beta FW to help test for this reboot issue that was seen on v.40 FW. I would presume all this would be corrected and fixed in next official FW release. 

 

Something to help with the internal fan, Install a laptop cooler fan under the router for 24/7 cooling. 

  • guccia123's avatar
    guccia123
    Aspirant
    May 31, 2023

    Thanks for fast response.

     

    When is full release expected of v43 firmware ?

     

    And will Restore settings via cfg work or should I manually enter all configs ?

    • FURRYe38's avatar
      FURRYe38
      Guru
      Jun 01, 2023

      No idea and version may not be v.43

       

      Manually setup from scratch then save off a new backup.

      • guccia123's avatar
        guccia123
        Aspirant
        Jun 03, 2023

        Resetted modem and configured from the scratch. Temp still NaNC