NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Night hawk unable to connect to RAX80
It all started w/my iphone would not see HP printer, out of the blue, even though the printer showed an IP in my network and said all ok AND nighthawk showed it on the network, WITH the right IP. Af...
Sorry, I should've reported back. I finnaly got it, this is what I had to do, I did not want to go thru factory reset....
Powered down router, unplugged everything from it, including to the modem.
Then, I plugged in the modem only, at that point & forward I was able to connect to the router.
It seems there was some glitch w/it. It had lost connectivity w/two devices (that I know of), one wired and one wireless, and of course access to admin router; both wired AND wireless!
But once I plugged everything in, everything was back and I'm back in business!
Very interesting AND frustrating experience!
Thank you for the reply and I apologize for not reporting back in a timely manner!
Cheers!
Hi Jim,
I would suggest running through a factory reset on the router and going through the setup assist assistant again.
Christian
Sorry, I should've reported back. I finnaly got it, this is what I had to do, I did not want to go thru factory reset....
Powered down router, unplugged everything from it, including to the modem.
Then, I plugged in the modem only, at that point & forward I was able to connect to the router.
It seems there was some glitch w/it. It had lost connectivity w/two devices (that I know of), one wired and one wireless, and of course access to admin router; both wired AND wireless!
But once I plugged everything in, everything was back and I'm back in business!
Very interesting AND frustrating experience!
Thank you for the reply and I apologize for not reporting back in a timely manner!
Cheers!