NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Nighthawk RAX120V2 DROPPING SPEEDS TO 100
Nighthawk RAX120V2 DROPPING SPEEDS TO 100 - Any solutions to this... I have rebooted multiple times - changed out cables... please help. Thank you
Happening over wireless and wired?
What devices are connected?
What Firmware version is currently loaded?
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
Be sure your using a good quality LAN cable between the modem and router. CAT6 is recommended.
How is the RAX120 configured and connected to the ISP service device? Yellow WAN port or the Multi Gig port?
Happening over wireless and wired? BOTH
What devices are connected? wifi devices are cameras, laptops 2x, desktop, Frig, 2 gaming consoles, phones...
What Firmware version is currently loaded? The current version V1.2.9.52
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too? using only netgear and plugged into the wall...
Be sure your using a good quality LAN cable between the modem and router. CAT6 is recommended. I will have to check - how?How is the RAX120 configured and connected to the ISP service device? Yellow WAN port or the Multi Gig port? Yellow Wan port. and then 2 other ethernet going up stairs for wired connections.
The wired is PlayStation and desktop computer and tv
So your ISP service is just a wall out let that they told you to connect the router too? No physical box device anywhere?
Does the top Internet globe LED turn AMBER when this happens?
Has a factory reset and setup from scratch been performed since last FW update?
There is printing on the cables that indicate CAT#.