NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Port forwarding to Nighthawk RAX70? trying to bridge two routers
I'm trying to bridge from a Telus T3200M Router to the Nighthawk RAX70 AX6600 Router but having great difficulty. Wifi Router set-up appeared to work through browser... but when we tried to connect ...
Litron wrote:
I was having security issues with the Telus combined Router/Modem - I was finding strange devices in my list on the Telus Router Webpage... and my internet would drag down to a halt when these devices were connected. I am familiar with secure network names and passwords, hiding SSID to form a Hidden Network, etc. - but without fail - after 3 or 4 days of doing a Router Factory Reset, then creating a new Hidden Wifi network and password... my internet would begin to drag and I would see these strange devices again.
If I were you I would go back and investigate that.
There are many reasons why "strange devices" appear in a router's settings.
The "three or four days" thing could be down to the two routers renegotiating the connection between them. To my mind this is the heart if your problem.
The moves you refer to mean nothing to me, mostly because I don't know why you decided on "hiding SSIDs", a famously useless way of protecting a network.
As to the rest of your message, I have a hard time unravelling a near on 900 words.
not secure according to network IT people I've talked to.
I have no idea who you talked to but I find it hard to believe that Telus sets out to create an unsafe network.
You appear to have a complicate problem. It is probably beyond the expertise that you will find here. Which may be why no one else has chipped in.
You might find it more useful to pay your own network expert to create the bulletproof network that seems to be your objective.
Appreciate the help.
* The strange devices on the Telus network happened prior to purchasing the Netgear router - and was the reason why I purchased the NG Router - to add an extra layer of security.
* An IT guy specializing in network design was the one who told me that combined modem / router combinations were less secure than the separate Modem and separate Router combo... not sure why.
I was able to get the network working - now. But after much trial and error. I had an issue with Nighthawk Router losing internet after using the power off button... and wasn't able to get it back... so had to do reset and start over.
I'll puzzle through it.
Thanks for your help.
Litron wrote:
* An IT guy specializing in network design was the one who told me that combined modem / router combinations were less secure than the separate Modem and separate Router combo... not sure why.
Me neither.
I can think of various scenarios where that might be the case, but they boil down to the way in which brands make modem/routers.
For example, until recently, Netgear made cable modem routers that had just one set of firmware, for the modem bit. Cable ISPs do not allow brands or individuals to update firmware. They insist that they are the only people who can do that.
More recently Netgear, and maybe other brands, have created devices with separate modem and router firmware. This leaves it to the ISP to handle the modem firmware while Netgear and user are free to update the router's firmware. In that way, new firmware can handle any security issues that might arise.
Along with giving a better choice of router features, this is one reason why experienced users prefer to have separate modems and routers.
While many ISPs, including my ISP (BT), like to insist that users must have a combined modem/router, and one that they provide, there aren't many networks where this is true. It is usually possible to buy a modem that will work on the network. Then you can add your own router.
Then there are the combined modem/routers like the one you own. Many have a modem only (bridge) mode option. Do that and you have effectively two separate devices with as much security as the router would deliver in its own.
The option that you were offered, messing around with port forwarding, looks like the ISP's usual "we know best" regime that is actually more complicated, and possibly less safe, than the bridge modem option.
The choice is yours. Believe what the ISP says and this network design expert, who may not be that familiar with domestic hardware, or follow the sort of suggestions that you will find here, from people who have seen many users in the same boat as you.
When people turn up here asking for instructions on how to do complicated things in a router, like port forwarding, the solution is often to ask what the user wants to achieve and to forget about their idea of the solution.
Just seeing your reply several days after posted.
I ended up doing the Bridge as was suggested - Netgear Support never did get back to me and the ticket is still open from 12/01/23 (8 days ago).Only issue now is that the Netgear router won't reconnect to the Internet after it is set to shut down from 12am to 7am. So I have to do a reset routine every morning - shut down both routers and then Boot in sequence. I have to leave my computer unplugged from Netgear router until it fully boots to recognize the line in.
Mostly working now -and probably as good as I can get it on my own.
There have been several hacking attempts on an older security camera wired to the Netgear router - so this may have been how the devices were accessing the former set-up... I just shut the camera down for now.Thanks for all your help!
Litron wrote:
Just seeing your reply several days after posted.
What was bridged in what way to what?
As explained, that is a widely abused term.
Only issue now is that the Netgear router won't reconnect to the Internet after it is set to shut down from 12am to 7am. So I have to do a reset routine every morning - shut down both routers and then Boot in sequence.
What is "set to shut down". The router's power? It's wifi? The Internet?
Modems and routers are designed to be on all the time. If you turn off one link in the chain, then you have to restart the whole network in the right sequence.
Be sure to restart your network in this sequence:
- Turn off and unplug modem.
- Turn off router and computers.
- Plug in and turn on modem. Wait 2 minutes for it to connect.
- Turn on the router and wait 2 minutes for it to connect.
- Turn on computers and rest of network.
This is so that each device sees the bits in front and can determine their settings for the Internet connection. You can't just turn thing on and off at random.
You can set a schedule for the router to turn off the wifi.