NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RAX120 5Gb port slowed down to 1Gb recently
I had setup the 5Gb port to connect to my 10Gb Synology so that I can transfer a file thru wifi from my computer to the RAX120 and then it's wired from the 5Gb port to the 10Gb port of the Synology. ...
CAT6A from RAX120 to Synology, this happened recently and no changes were made to neither settings nor wiring etc
I would test a different device on this to compare.
Try a full on factory reset, power OFF for 1 min, then back ON. Power OFF NAS as well then back ON. Set up the router from scratch and see if this changes anything.
I have tried all the steps from the previous post and it's still capped, I reset the router to factory and connected it straight from 5Gb to 10Gb of Synology. Same issue.
I don't have another 10Gb device I can test the router with.
In the Network settings the Synology NAS sees the router 5Gb port as "5000 Mbps, Full duplex, MTU 1500"
I just plugged a USB3 SSD drive to the RAX120 and tested the speed, it capped at 50MB, is there a setting somewhere that caps the speed per user? That's the only thing I can think of.
I factory resetted it and I'm standing right in front of it.
I've tried several setting changes but I'm still topping 60MB/s
Is there an app or another test I can run?