NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Rax120 v2 constant random rebooting
I have the RAX120 v2 ever since purchase it has been constantly randomly rebooting. I have been through all of netgears troubleshooting guides with and without tech support. After no solution they fin...
Same. Tried two routers with different ISPs. Tried downgarding firmware. I noticed the DoS logs so I disabled that in the WAN settings. Nothing has worked.
Disable wmm on 2.4ghz, you'll find it under qos in a different tab.
- Disabling wmm on the 2.4ghz In the advanced setup tab under quality of service seems to have helped me quite a bit. The router has been up 12 hours straight where before it wouldn't last an hour. Hopefully this is a real fix until Netgear hopefully patches this major bug.
I disabled WMM on 2.4 Ghz and 5 Ghz and didn't see a reboot for three days. I reenabled WMM on 5 Ghz cause my speed dropped to 54 Mbps when disabled and 1200 Mbps when enabled. It hasn't rebooted for five days but 2.4 gHz is down to 24 Mbps.. What a shame but most of the devices on 2.4 gHz aren't very demanding, 7 Alexa Dots, 7 Ring cameras, I do have a couple Roku devices on this too but I'll try to move them to 5 Ghz.
So if you re-enabled WMM on 2.4Ghz, do the reboots happen again?
TN_Dave wrote:
I disabled WMM on 2.4 Ghz and 5 Ghz and didn't see a reboot for three days. I reenabled WMM on 5 Ghz cause my speed dropped to 54 Mbps when disabled and 1200 Mbps when enabled. It hasn't rebooted for five days but 2.4 gHz is down to 24 Mbps.. What a shame but most of the devices on 2.4 gHz aren't very demanding, 7 Alexa Dots, 7 Ring cameras, I do have a couple Roku devices on this too but I'll try to move them to 5 Ghz.
