NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RAX38v2 cables not connected
I have a Nighthawk AX4 RAX38v2. It worked fine, but I had to turn it off for two weeks and when I turned it back on, it stopped working. The internet access LED does not light up. After rebooting, th...
Something at your location with your ISPs ONT isn't working with the RAX router. Something to check with the ISP about.
I just tried resetting and rebooting in the sequence you wrote - didn't help. I also changed the DHCP, but that didn't help either.
I don't know the Mfr and model# of the modem/ONT of the ISP that the NG router is connected to. But I can call my ISP tomorrow when they start working again if that could be the cause.
There is a CAT5 LAN cable connected to the NG.
CAT5 is only rated for 100Mpbs. CAT6 is recommended.
I know. But it worked fine before.
Here are screenshots of the error:Ok. Ya the ROUTER isn't getting any connection from the ONT thus it's reporting not seeing the connection.
Do you have a friend, neighbor or family member around where you could take the RAX router to and temp connect it it there to see if it works at a different location?
I'll try the router in a different location tomorrow and report back. Thanks for your help.
.png){kind=link}