I am having stability issues with the latest firmware. Are there any devices known to cause issues with older drivers specifically? I have seen it mentioned elsewhere in the forum.

What stability issues are you having? What firmware are you on? What modem is it connected to? Was there issues prior to updating the firmware? if not, a reasonable first step for issues after firmware changes is to reset/reinstall.

Looking in my logs I noticed more attacks on my QNAP which I have had to change the ports on just to stem the attacks.There are botnets crawling the net trolling for outdated firmware.It seems pretty stable now after doing an upload of the firmware in chrome. Will report back in a week or so.

I may last post I forgot to mention I used a computer connected to the router via an ethernet cable, not via wifi.

If you hadn’t realised, everyone’s drop out issues are wifi related when they were on firmware version 1.38.80. I have a Philips Hue bridge connected via Ethernet but doesn’t get affected by the wifi drops obviously because it’s not connected via wifi. Where as everything else in the house is connected via wifi.Also as mentioned previously, I’m not having wifi drop issues after installing the beta firmware from L2 support.

hey plemans, I did everything short of a reinstall or reflash. I have tried turning off some extra features as well. V1.0.3.80_1.0.1 is the version I am on presently.The issue is the router locks up and the radios seem to go offline. I haven't tried accessing it via the browser during one of these lockups yet. I have just used the power switch to cycle the router.I have a switch connected as well. The modem doesn't seem to be the issue.I have had stability issues on a previous version as well.

RAX40 router stability driver issues

21 Replies

plemans
Guru
Sep 09, 2020
What stability issues are you having?
What firmware are you on?
What modem is it connected to?
Was there issues prior to updating the firmware? if not, a reasonable first step for issues after firmware changes is to reset/reinstall.
- jvamos
  Tutor
  Sep 09, 2020
  hey plemans,
  
  I did everything short of a reinstall or reflash. I have tried turning off some extra features as well. V1.0.3.80_1.0.1 is the version I am on presently.
  
  The issue is the router locks up and the radios seem to go offline. I haven't tried accessing it via the browser during one of these lockups yet. I have just used the power switch to cycle the router.
  
  I have a switch connected as well. The modem doesn't seem to be the issue.
  I have had stability issues on a previous version as well.
  - plemans
    Guru
    Sep 09, 2020
    I'd start with the factory reset first.

Forum Discussion

RAX40 router stability driver issues