RAX50 AX5400

Question

There is a problem that everyone is concerned about.Region is locked and cannot be selected.The debug page also has no options to choose telnet enable,

We bought a complete product.The current RAX50 wireless network 5GHz lacks several channel tunnels.The network on 5GHz is congested for a few seconds every 1-2 hours, especially during games.

We can't confirm the problem.We want to add a telnet enabled option or region selection enabled to debug network congestion.

plemans · Answer

Not all regions are locked. but if you did buy one from a locked region and telenet is disabled and not able to be enabled, you might look at returning it so you can purchase one for the region you're in.&nbsp;

Mandess · Answer

In the past few days, I found about rax50 open source file. Toss up tow days, found it only able to read, something lack of closed source code to compile. Is it possible to make a special region unlocked version for download?

Mandess · Answer

&nbsp; A pass month of tested, I found the BandChannel at mixed modle,wireless network 2.4G and 5G is highly unstable.&nbsp; Like the follwing set, we call mixed BandChannel,var Band1Channel_20M = new Array (36,40,44,48);var Band1Channel_40M = new Array (36,40,44,48);var Band1Channel_160M = new Array (36,40,44,48);&nbsp; When we choose BandChannel 44, that means mixed modle 20/40/160MHz is used. This setting often self-adapting auto change Band, make wireless network&nbsp;disconnected 2 seconds.&nbsp; There is no option to mix or fix, like the follwing set,&nbsp; &nbsp; &nbsp; &nbsp; 20/40/80/160 MHz&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; mixed&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 20 MHz&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; fixed&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 40 MHz&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; fixed&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 80 MHz&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; fixed&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 160 MHz&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; fixedWireless network at fixed BandChannel is very stable.&nbsp;

FURRYe38 · Answer

What is "mixed modle" Mixed Mode?&nbsp;
&nbsp;
What Firmware version is currently loaded?
&nbsp;
"This setting often self-adapting auto change Band, make wireless network&nbsp;disconnected&nbsp;2 seconds." I presume i may take wireless devices and the router to effect any changes a bit longer than when using single mode settings. As everything has to get change, reconnect and settle in. This only happens once when making changes to the router?&nbsp;
&nbsp;
Is this with Smart Connect enabled or disabled?&nbsp;

Forum Discussion

RAX50 AX5400

4 Replies