NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RAX70 cannot display attached devices
The RAX70 is a $350 router. It cannot display a list of attached devices on the LAN out of the box with the latest firmware. Does anyone know why?
What mode is the ISP modem working in? Router or bridged?
Try a different PC to compare?
Might try reverting back one FW version to see if this resolves.
Thanks FURRYe38
Router Firmware Version V1.0.12.114
Issue exists in Chrome, Safari, and Firefox with cleared cache
Router is connected to a Verizon Internet Gateway model No. ASK-NCQ1338
Has a factory reset and setup from scratch been performed since last FW update?
Indeed it has.
What mode is the ISP modem working in? Router or bridged?
Try a different PC to compare?
Might try reverting back one FW version to see if this resolves.Success! The solution was to set the ISP gateway to bridged mode, and not router mode. Devices appeared after the router was power cycled.
FURRYe38 My network devices were connected to the router, and not the gateway. For us plebs, can you explain why the router would have trouble finding attached devices if the ISP gateway was not set to bridged mode?