RAX80 / RAX75 Firmware 1.0.1.70 Problem

I think the new firmware is regional I am in the USA in Los Angeles, CA and there is no new firmware found in the gui. The latest is 1.0.1.70

Router shuts off wireless access every 24 to 36 hours after upgrade to 1.0.70.1.  Rebooting the router so far re-enables wireless service.  I can do this either via power reset or can access to router remotely using cell service and the Nighthawk app from phone.

Leo

The latest firmware for RAX75/80 is 1.0.2.76 http://www.downloads.netgear.com/files/GDC/RAX75/RAX75-V1.0.2.76_1.0.35.zip

You have joined in on an existing conversation that may or may not have anything to do with your problems. You aren't even using the same hardware, according to your footer.

There is also a good chance that the official support team is busily monitoring new conversations and may miss your addition to this one.

If you do want help with your problem, check previous stuff that may be related then start your own discussion.

If you do decide to ask a question, you should provide more details and your own version of the information that the forum suggests that you provide. For example, as this is a router, it helps to know what modem you are using and the various things that you have tried to fix the problem.

You talk of a "power reset". If you mean power recycling (on/off), then a proper reset might be in order.

If you visit the support pages:

Support | NETGEAR

you can feed in your model number and find the documentation for your hardware.

If you need more help, you might get better and quicker replies, and find other answers, over in the appropriate section for the R8000:

Nighthawk WiFi Routers