NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RAX80 Power led is white no others will light up, led switch is on.
I did a power cycle on my modem/router last night and now it is a brick. The power led comes on but no other leds will light. The led switch is on, and I am unable to connect to the device nor can ...
You can try recoving it with tftp or nmrpflash.
are you on windows? if so, follow this guide
https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP
just make sure you enable tftp
https://www.thewindowsclub.com/enable-tftp-windows-10
and here's a video walk through using a tftp client. Use the built in one for windows 10 though. the video is more of an example of how its done.
https://www.youtube.com/watch?v=R9DLrLQrpaw
and if that doesn't work, you can try using nmrpflash
https://github.com/jclehner/nmrpflash
Thanks for the suggestion, however the router right now is a brick, no access and only the power light comes on. I have moved on to a different brand of router. Not sure I'll come back to netgear products or not.
Same exact issue here except with a CAX-80. Netgear doesn't want to have anything to do with attempting to repair this other than try to get me to buy a Gearhead subscription. This is clearly not a software issue as there's no way to access the device at all. I did buy another CAX-80 hoping I could repair this one, but I'm not having any luck finding a repair depot for hardware issues. I believe the board itself is faulty.